Emergency & Exit Lighting Services in Batesville, MS
Installation & Inspection in Mississippi
Emergency and exit lighting are crucial components of any evacuation plan and a necessary link to safe escape when a fire or other hazard occurs at your Batesville area workplace. At State Systems, we take your safety seriously and urge customers to have our certified technicians professionally install and also perform regular inspection of both their emergency lighting and exit lighting. We have the experience and knowledge to ensure your emergency and exit lighting system works properly when you need it most. For installation or inspection services in Batesville, call State Systems at 901-531-6550.
Batesville Area Emergency & Exit Lighting Installation
Emergency lighting should be a component of your fire protection plan to save lives and property in the event of an emergency in your office building. During serious power outage situations, emergency lighting illuminates all exit passages–including corridors, stairwells, ramps and escalators. Exit lighting also helps by pointing the way to a safe exit.
If your property needs emergency or exit lighting installed or replaced in Batesville, MS, contact us today for an estimate! Our fire protection technicians can design a lighting system that will allow for a safe exit for your employees in case of an emergency situation.
Emergency & Exit Lighting Inspections
In an emergency situation, your employees can become disoriented and overall safety can be compromised if either the emergency or exit lighting fails to activate. Don’t take the components of your emergency and exit lighting system for granted. Let State Systems check your batteries, charging systems and bulbs to ensure you’re prepared. To help you out, we keep up with all maintenance and records of inspections so you don’t have to.
Safety Code Guiding Emergency and Exit Lighting
The National Fire Protection Association (NFPA) 101 Life Safety Code requires that all industrial emergency lighting and exit lighting devices be inspected monthly and tested annually. All of our licensed technicians at State Systems understand the major components and criteria established by NFPA 101, which aims to protect employees in the case of a disaster.
Emergency and Exit Lighting Maintenance Schedule
At State Systems, we offer the following monthly inspection and annual testing schedule that adheres to NFPA 101 for emergency and exit lighting devices:
Monthly inspection for emergency and exit lighting:
- Test integrity of lights and batteries through test button for 30 seconds
- Check for physical damage
- Align the beam and tighten if necessary
- Check AC electrical connection and charge lamps as needed
Annual testing for emergency and exit lighting:
- Full simulation 90-minute test
- Disconnect AC power supply to each unit
- Check battery and lens for corrosion or damage
- Clean unit and lens as required
- Adjust beam for proper placement
- Check charging system voltage, check battery output voltage, and check line voltage
Schedule Your Emergency & Exit Lighting Services in Batesville
State Systems is here to serve your Batesville company’s fire protection needs. To learn more about our emergency and exit lighting inspection services offered throughout Batesville, or for a quote, contact us or call 901-531-6550.
It’s not productive for me to be calling five different people to inspect and service five different kinds of fire alarms – nor can I…Michael Carson Read More